HORIZONTAL LOOPS

Used where adequate land space is available, horizontal loops involve one or more trenches that are dug using a backhoe or excavator. High Density Green Geothermal Pipe is inserted, and the trenches are backfilled. Each trench ranges in length up to 300'.

VERTICAL LOOPS

Vertical loops are used when space is limited. Holes are bored using a drilling rig, and a pair of High Density Green Geothermal Pipes with special u-bend fittings is inserted into the holes. A typical home requires three to five bores with about 10' between each hole. Bore holes can range from 75' to 300'.

OPEN LOOPS

An open loop is used where there is an abundant supply of quality well water. The well must have enough capacity to provide adequate flow for both domestic use and the GeoSmart Energy unit. Discharge water should be sent directly to a second recharge well.

POND LOOPS

Gaining popularity in "Cottage Country", Pond or Lake Loops are a great choice if an adequately sized body of water is close to your home. This is an affordable alternative as excavation costs can be virtually eliminated. A series of High Density Green Geothermal closed loops can be extended and sunk to the bottom of the water body. A 1/2-acre, 8-foot-deep pond is usually sufficient for the average home.